+1 from overheating. . FE TREE CAUTION : FONT OPEN 4 CAUTION: TO REDUCE THE FISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) USER SERVICEABLE PARTS INSIDE. NO: REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is inferred to ‘alert the user 1 the presence of insulated “dangerous voltage® within the product's enclosures that may be of sufficient magnitude to constitute a risk of electrical .
Remote Control TITTY 70 ® © p@®® MAIN ROOM / SUB ROOM selector (15, 16) @ MAIN ROOM ON/OFF button (18) SUB ROOM ON/OFF Barton (16, 24) @ Display window (17, MAIN ROOM/SUB ROOM indicators b.
A Setting Up the RF Rod Antenna Setting Up the IR Signal Transmitter The remote control supplied for this receiver can transmit RF (Radio Frequency) signal. The RF rod amen can receive the RF signals emitted from rhe remote control. So, with the RF rod antenna connected, you can operate the receiver at a distance feet (15 m) using the remote control. However, if the antenna cannot receive signals stably, you cannot operate the receiver correctly.
Putting Batteries in the Remote Control Connecting the Power Cord Before using the remote control, put two supplied batteries first, Before plugging the receiver into an AC outlet, make sure that all connections have been made. 1. On the back of the remote control, remove the battery cover. Plug the power cord into an AC outlet. & Keep the power cord away from the connecting cables and the 2. Insert batteries. Make sure to match the polarity: antenna. The power cord may cause noise or screen interference.
