Users Manual

ManualsBrandsSMK ManualsNetwork HardwareDual mode Bluetooth Module

User Manual

5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan

Bluetooth

module with a built-in 2.4GHz band antenna

Model Name: Dual mode Bluetooth Module

Model number: BT801

GENERAL

BT801 is a Bluetooth communication module complying with Bluetooth Version 5.0. It

works with both Bluetooth Classic and Low Energy. It operates in the two modes,

Command Mode and Automatic Mode, and makes automatic connection in Automatic

Mode. It supports master and slave operations. It becomes an adapter which transfers

various data wirelessly between master and slave devices. Therefore, wireless data

communication can be realized by only replacing the cable between apparatuses with

BT801, without changing a host system.

Features

1) Surface mounting module with a built-in antenna.

2) Unique automatic connection method and command connection mode can be

selected as control methods.

3) Support various profiles and protocols at user's requests.

Integration to the end product

The SMK Transceiver Module, model BT801 has to be installed and used in accordance

with the technical description/installation instructions provided by the manufacturer.

The system may only be implemented in the configuration that was authorized. Note that

any changes or modifications to this equipment not expressly approved by the

manufacturer could void the user’s authority to operate this equipment.

Specification

1) Bluetooth® Specifications Ver.5.0-compliant

(Bluetooth Classic + Bluetooth Low Energy)

2) Frequency Range: 2402-2480 MHz

3) Modulation System: GFSK, π/4－DQPSK, 8-DPSK

4) Max. Data rate: 3Mbps

5) Antenna: PCB printed antenna

Summary of content (4 pages)

PAGE 1
User Manual Bluetooth® module with a built-in 2.4GHz band antenna Model Name: Dual mode Bluetooth Module Model number: BT801 GENERAL BT801 is a Bluetooth communication module complying with Bluetooth Version 5.0. It works with both Bluetooth Classic and Low Energy. It operates in the two modes, Command Mode and Automatic Mode, and makes automatic connection in Automatic Mode. It supports master and slave operations.
PAGE 2
User Manual Regulatory Information USA-Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy.
PAGE 3
User Manual The proposed FCC IC label format is to be placed on the module. If it is not visible when the module is installed into the system, “Contains FCC ID:GT3RD001, Contains IC: 3683A-RD001” shall be placed on the outside of final host system. Caution: Exposure to Radio Frequency Radiation. (1) When use in mobile devices This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.
PAGE 4
User Manual Caution: Exposure to Radio Frequency Radiation. (1) When use in mobile devices This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).