User’s Manual Wireless Stopwatch Presenter with Laser Pointer Page
Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
• Consult the dealer or an experienced radio/TV technician for help. Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Extension cables are not recommended, if used, they must be shielded in order to comply with the emission limits. IC Certification The term “IC” before the certification/registration number only signifies that the Industry Canada technical specifications were met.
System Requirements Hardware: 1 available USB port Operating System: Windows 2000, XP or Vista Macintosh OS X or above (F5 SlideShow and Alt-Tab Application Switch not supported) Package Contents • • • • • Wireless 2.
• Open the battery compartment by pressing down the cover latch and sliding the door off the presenter. • Insert the two supplied AAA batteries (included in the package) to the battery slots. Make sure the positive (+) and negative (-) ends of the batteries match the polarity markings inside the battery compartment. • Close the battery cover back into position.
• Connect the micro USB receiver dongle to an available USB port on your computer. Wait for the computer to go through its default process of recognizing the new hardware and installing the built-in native driver. You don’t need to do anything while your computer is going through the installation of a new device. • Power on the presenter by sliding the on/off switch to ON position.
• The radio frequency (RF) codes are factory preset for your convenience; the presenter should be functional at this point. • If for any reason the presenter does not function correctly, i.e. the presentation slides do not advance to the next page, there may be other wireless devices in the vicinity operating in the same radio frequency channel.
Connect Button (1) Press the connect button on the receiver (2) Press the connect button on the presenter Using the Presenter Laser Beam Dongle Storage LCD Time Display On/off Application Switch Previous Page Dark Screen Scroller/LCD Display Backlit Stopwatch Next Page Laser Pointer Slideshow/Esc Page
• • F5/Esc Slideshow toggle key starts a slideshow (F5) and exits from a slideshow (Esc). Note: in PowerPoint slideshow starts with page 1 when resumed in the middle of a presentation. Next Page key to advance to the next slide. • Previous Page key to return to the previous slide. • Application Switch (Alt-Tab) key displays all the open windows and switches to the desired window by pausing over the selected window icon for 3 seconds.
up or down on the scroller for more than 1 second at a time. In PowerPoint the scroller serves as an alternative key for Next Page and Previous Page. • Stopwatch control and LCD display (H:MM) • When presenter power is turned on: stopwatch on standby and LCD display turns on (the Hour and Minute separator “:” is constant.) • If stopwatch is not activated within 1 minute it automatically turns off. To turn on the stopwatch function, press the stopwatch button once. Note: the stopwatch is not yet activated.
advances. • To power off the stopwatch function, hold down the stopwatch button for 3 seconds and the LCD display shuts down. • When timer is on, hold down the scroller towards the presenter to activate the backlit on the LCD display for better visibility of time advanced. Operating Tips & Trouble Shooting • Make sure the presenter is turned on by checking the on/off switch located at the side of the presenter before using it.
even when it’s turned off. If for any reason the connection to the system is lost or interference is detected (erratic slide control), first check if the micro USB receiver dongle is plugged in to the computer USB port, then verify that the presenter is within the range (up to 70 feet) from your computer. If the connection is lost it can be fixed by following the instructions in the Connecting the Presenter to the Computer section to reconnect the devices.
cost of any substitute equipment, facilities or services, claims by third parties other than you, and injury to property. SMK-LINK Electronics’s total liability for damages for any cause related to, or arising out of, the use or inability to use the product, shall not exceed the original price paid for the product even if SMK-LINK Electronics has been informed of such possibility. If your Product requires warranty service, you must first contact SMK-LINK Electronics Product Support to receive an RMA Number.
Thank You Thank you for purchasing the Wireless Stopwatch Presenter. We know you had other choices and we appreciate that you chose Interlink Electronics Wireless Presenter by SMK-LINK for your product needs. So that we may better serve you in the future, please register online at www.smklink.com/register.
