RemotePoint Ruby Presenter VP4590 VP4590 Page 1
Laser Safety Statement CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. The laser is activated by pressing the laser button identified in the user guide. • • • • • • Do not stare into the laser beam, or shine the laser at others. Do not allow minors to use the laser unsupervised. Avoid pointing the laser pointer at any reflective surface. Do not disassemble the device, it has no serviceable parts.
Step 1 Step 2 Power on/off switch Install the Batteries (Supplied) • Open the battery compartment by pressing down the cover latch and sliding the door off the Presenter. • Insert the two supplied AAA batteries to the battery slots. • Make sure the positive (+) and negative (-) ends of the batteries match the polarity markings inside the battery compartment. • Plug In the Receiver • Retrieve the USB receiver dongle from the built-in storage bay on the Presenter.
Step 3 LED Indicators Use the Presenter Mouse buttons SpeedScroll wheel Power switch Cursor control Slide control Laser LED indicator Start slideshow/ Escape* (Does not work with Mac OS) Laser Button LED Description Red LED on for 3 Seconds Power on LED Indicator Description Blinking Red LED Battery low Solid Green LED laser beam active Blinking Green / Red LED Pairing Red LED on for 3 Seconds Pairing is successful Hide/Reveal slideshow Laser trigger/ Laser button LED Dockable receiv
Re-Pairing the Receiver if Needed • If for any reason the Presenter does not function properly (i.e. the presentation slides do not advance to the next page), there may be other wireless devices in the vicinity operating in the same radio frequency channel. To reset it to another channel, bring the Presenter close to the receiver dongle on the computer, press down on the “Start slideshow/ Escape” and the “Hide/Reveal slideshow” buttons on the Presenter simultaneously for about 5 seconds.
rights which vary from state to state and country to country. This warranty is understood to be the complete and exclusive agreement between the parties, superseding all prior agreements, oral or written, and all other communications between the parties relating to the matter of this warranty. The above warranty does not apply to Products sold in Australia. Products sold in Australia by an authorized reseller will contain an Australia specific warranty statement.
Declaration of Conformity Thank You Manufacturer: Congratulations on your purchase of the RemotePoint Ruby Presenter. We thank you for choosing SMK-Link Electronics to meet your wireless needs and look forward to serving you in the future. To learn about new SMK-Link products as they become available, and to ensure the best possible customer support, please register your product online at www.smklink.com/register.
Page 13 Page 14
