Specifications

Page 7
When fully charged the scroll wheel will
cease to glow.
The initial charging process may take up to
8 hours. Subsequent recharge may require
less time depending on the level of residual
power of the batteries.
The mouse is operational during charg
-
ing; you can continue use the mouse while
charging it via the USB charge cable.
You are now ready to set up the mouse to
work with your Bluetooth system. (Note:
it’s not necessary to wait for the batteries to
be fully charged before setting up Bluetooth
connection to your system.) Turn on the
power by sliding the on/off switch located
at the bottom of the mouse to the “on” posi-
tion.
Make sure the computers power
management is set to disable
hibernation mode while the mouse is
being charged. (Go to Control Panel,
Power Options, select “Hibernate” from
the tabs and uncheck the box marked
“Enable Hibernation”.)