Users Manual Rechargeable Bluetooth Notebook Mouse Page
Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
• Consult the dealer or an experienced radio/TV technician for help. Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Extension cables are not recommended, if used, they must be shielded in order to comply with the emission limits. IC Certification TThe term “IC” before the certification/registration number only signifies that the Industry Canada technical specifications were met.
System Requirements Hardware: • Bluetooth-enabled computer system; • 1 available USB 1.1 or 2.0 port Operating System: • Windows 2000, XP or Vista; • Mac OS 10.4.
Step 1: Place the mouse on a flat surface and remove the battery cover from the top of the mouse by pressing the release button located below the scroll wheel. The mouse will automatically eject the battery cover. Step 2: Insert the two supplied AAA rechargeable Ni-MH batteries (included in the package) to the battery slots. Make sure the positive (+) and negative (-) ends of the batteries match the polarity markings inside the battery compartment. Step 3: Snap the battery cover back into position.
wings for User's Manual Charging the Batteries • It’s recommended that you fully charge the batteries before initial use; nevertheless it’s ready for set up (see next step) anytime during charging. • Plug the USB connector of the charge cable (included in the box) into the computer’s available USB port. • Connect the mini-USB tip of the cable to the mouse charge port located at the front end of the mouse.
When fully charged the scroll wheel will cease to glow. • The initial charging process may take up to 8 hours. Subsequent recharge may require less time depending on the level of residual power of the batteries. • The mouse is operational during charging; you can continue use the mouse while charging it via the USB charge cable. • You are now ready to set up the mouse to work with your Bluetooth system.
Setting up Bluetooth Connection Connect button On/Off Switch Optical Sensor Before you can use Bluetooth devices for the first time you must connect your devices through a standard discovery mode and pairing process. During the process, depending on the system and the Bluetooth software used, it may ask you whether you want to use a passkey; please select “no passkey”.
Mouse is designed to work with the three major Bluetooth software stack (protocol) standards: WIDCOMM (Broadcom), Microsoft and Toshiba. In addition, this mouse supports Macintosh OS with Bluetooth capability. Please review the documentation that come with your computer system for any specifics regarding your Bluetooth system and/or consult with your system vendor if your system does not support one of the above mentioned Bluetooth software stacks. WIDCOMM Bluetooth Software 1.
3. At the Bluetooth Setup Wizard, check “I want to find a specific Bluetooth device and configure how this computer will use its services.” Click Next. 4. Turn your mouse on. Press the connect button located at the bottom of the mouse until the red LED mouse sensor lights up and the scroll wheel of the mouse flashes.
5. The computer will search for new Bluetooth devices in the range and list each device on the screen. Select the Interlink Bluetooth Rechargeable Notebook Mouse. Click Next. 6. Follow the onscreen instructions and installation process begins when you click Next. 7. The Confirmation Required window appears. At this point your Bluetooth mouse should be able to move the cursor. Use your mouse to click on the Click here box. Your Bluetooth mouse has been successfully installed.
TOSHIBA Bluetooth Software 1. Make sure your computer’s Bluetooth radio is turned on. 2. Double click on the Bluetooth Manager icon in the system tray and then click New Connection. 3.
appears. Choose the Express Mode and click Next. 4. Turn your mouse on. Press the connect button located at the bottom of the mouse until the red LED mouse sensor lights up and the scroll wheel of the mouse flashes. 5.
list each device on the screen. Select the Interlink Bluetooth Rechargeable Notebook Mouse. Click Next. 6. The system starts installing drivers. 7. After installation is done, the New Hardware Wizard window appears. It will offer to search for Windows updates, select No and click Next. 8. Follow the onscreen instructions until the installation process is completed.
MICROSOFT Bluetooth Software 1. Make sure your computer’s Bluetooth radio is turned on. 2. Double click on the Bluetooth Manager icon in the system tray. 3. Select Add Bluetooth Device. 4. Select “My device is set up and ready to be found” on the Add Bluetooth Device window and click Next.
5. Turn your mouse on. Press the connect button located at the bottom of the mouse until the red LED mouse sensor lights up and the scroll wheel of the mouse flashes. 6. The computer will search for new Bluetooth devices in the range and list each device on the screen. Select the Interlink Bluetooth Rechargeable Notebook Mouse. Click Next.
7. A window appears asking for a passkey. Select “Don’t use a passkey” and click Next. 8. Click Finish. Your Bluetooth mouse is set up and ready to go. APPLE Macintosh Bluetooth Software 1. Make sure your computer’s Bluetooth radio is turned on. 2.
desktop or in the system bar. 3. Or, click the Apple icon and click System Preferences, then click on the Bluetooth icon. 4. Select Turn Bluetooth On to enable Bluetooth for your Macintosh computer if it’s not already on. 5. Select Set Up Bluetooth Devices. Bluetooth Setup Assistant screen will show up. Click Continue. 6. Select Mouse from the device list and click Continue.
7. Turn your mouse on. Press the connect button located at the bottom of the mouse until the red LED mouse sensor lights up and the scroll wheel of the mouse flashes. 8. The computer will search for new Bluetooth devices in the range and list each device on the screen. Select the Interlink Bluetooth Rechargeable Notebook Mouse. Click Continue. 9. The mouse will start pairing with the computer. Click Continue.
10. On the Conclusion screen, click Quit to exit setup. Your Bluetooth Mouse is successfully installed. Operating Tips & Trouble Shooting • Make sure the mouse is turned on by checking the on/off switch located at the bottom of the mouse before using it. • Conserve the battery power by switching the on/off switch to “off” position while traveling or if the mouse will not be in use for awhile. If you will not use the mouse for a long period of time remove the batteries from the battery compartment.
sleep mode after 8 minutes of inactivity to save battery power. Click on any mouse button to wake it up. • When the mouse cursor behaves erratically check the scroll wheel for power-low indicator, i.e. LED light glowing; and follow the instructions in Charging the Batteries section to recharge the batteries. The mouse is functional during recharge. • The mouse stays connected to your Bluetooth-enabled computer even when it’s turned off and out of range once it’s set up.
Bluetooth stack update on your system vendor’s website. Warranty: SMK-LINK Electronics warrants to the original end-user purchaser of the Product (“you”) that the Product, excluding batteries, will be free from defects in materials or workmanship under normal use and service for one-year from date of purchase. Dated invoice or sales receipt is necessary to accompany the Product returned for warranty service consideration.
If your Product requires warranty service, you must first contact SMK-LINK Electronics Product Support to receive an RMA Number. The contact information can be found on SMKLINK Electronics website: http://www.smklink.com/support/ contactsupport.html. This warranty does not affect your statutory right and you may also have other rights which vary from state to state.
Thank You Thank you for purchasing the Rechargeable Bluetooth Notebook Mouse. We know you had other choices and we appreciate that you chose Interlink Electronics by SMK-Link for your wireless needs. So that we may better serve you in the future, please register online at www.smklink.com/register. P/N 94-45877 Rev. P3 © 2008 SMK-Link Electronics, Inc.
