User's Manual

Charging the Batteries
• It’s recommended that you fully charge the batteries before initial use;
nevertheless it’s ready for set up (see next step) anytime during charging.
• Connect the mini USB connector of the charging cable (included in the box) to
the mouse’s mini USB port. Use only the supplied charging cable to charge
the batteries.
• Connect the USB connector of the charging cable to your computer’s
available USB port. The red LED indicator flashes during charging and turns
to solid red to indicate it’s fully charged.
• The initial charging process may take up to 5 hours. Subsequent recharge
may require less time, normally between 3 and 5 hours depending on the
level of residual power in the batteries.
• The mouse is operational during charging; you may continue to use the
mouse while charging via the USB charging cable.
• When the batteries are fully charged the LED turns to solid red. Remove the
charging cable from the mouse and the computer. Repeat the above steps to
recharge the batteries when the LED flashes quickly and the cursor
movements are irregular indicating low power.
USB Cable, Mini B to A
Charging/Pairing Port
USB Mini B
On/Off Switch
Power On LED
Indicator
Make sure the computer’s power management is set to disable
hibernation mode while the product is being charged. (Go to Control
Panel, Power Options, select “Hibernate” from the tabs and uncheck the
box marked “Enable Hibernation.)