User Manual

Page 9
• On your iCalc Bluetooth Calculator Keypad, type the
passkey (numbers) provided on your computer screen,
followed by “enter” key on the keypad. Please note
that the numbers will not be displayed on the keypad’s
LCD screen as you type them in. At this point, the
pairing process is complete. Click on “Continue.”
• On the conclusion screen, click on “Quit.”
The keypad is ready to use.
Device Pairing on Windows
• Make sure the power is on and the OS Selector at the
bottom of the keypad is switched to PC. The LCD display
should say “On Keypad” and a “0” should be displayed.
• Press the “Conn” button on the back of the keypad.
The battery indicator LED will begin flashing green.
Page 10
• Click on the Bluetooth icon on your computer screen,
or access the Control Panel of your computer and select
“Devices and Printers”. Click on “Add a Device”. The
computer will display Bluetooth devices within range.
• Select the iCalc Bluetooth Calculator
Keypad and click on “Next.”
• On your iCalc Bluetooth Calculator Keypad, type the
passkey (numbers) provided on your computer screen,
followed by “enter” key on the keypad. Please note
that the numbers will not be displayed on the keypad’s
LCD screen as you type them in. At this point, the
pairing process is complete. Click on “Next.”
• When the connection / pairing is successfully completed,
your computer screen displays the following message.
Click on “Close” to finish and exit this process.