User's Manual
Installation
Adding or Changing Batteries
Open the battery compartment by pressing down on the
latch. Insert the batteries per the diagram on the remote.
Standard AA alkaline batteries are recommended.
Using the Docking Station
An optional docking station is provided for xed
installations. To use the docking station, plug the USB
cable into a free USB port on your computer and plug the
USB receiver into the USB port in the center of the docking
station. To achieve maximum range and performance,
experiment with the orientation and position of the docking
station until satised.
Use the Receiver Directly
The receiver can also be plugged
directly into any free USB port
on your computer or laptop for
immediate use.
Page 2