User's Manual
Page 15
Forgetting Learned Keys
Step 1: Enter setup mode by holding the device button down
for 3 seconds. After 3 seconds all of the device buttons will
blink to conrm that you are in setup mode.
Step 2: Enter “forget” mode by pressing the Stop button. The
device button will blink once to indicate it is ready to forget
the keys it learned.
Step 3: Press the key you wish to forget. If this key has learned
anything, the device button will blink once and revert to its
original settings, otherwise, it will blink four times in error.
Step 4: Press keys you wish to forget until you are done. When
you are done, you can either wait 10 seconds to time out or
press another device button to exit.
Note: If you had previously entered a four-digit device code, the
forgotten keys will return to their original settings.