Installation Manual

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Page 32 of 33
Installation Manual
Step 7: Re-install gasket on cover. (If it was removed) (Fig I)
Step 8: Re-install gear cover back onto winch using the previously removed bolts. (Fig J)
Step 9: Once all bolts are tighten check operation of new clutch lever by turning between engaged
mode and free spool mode. You should feel the “click” and feel it lock into position. Installation
is now complete.