Installation Manual

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Cage Kit
07-11 JK Unlimited (4-Dr)
Part # 76902
(Fig 15) (Fig 16)
Step 15: Install the top front bar (The bend points towards the rear and up) Slide the ends of the bar through
the slots you made in the cover. It may be easier to do this at a slight angle first. Move bar forward
parallel with the windshield frame. Position it as far forwards as you can.
Step 16: Loosely attach front clamp brackets with the included socket cap bolts.(Fig 17, 18)
(Fig 17) (Fig 18) (Fig 19)
Step 17: Remove the center sound bar.
Step 18: Install the front main plate. (From the front top bar back to the center roll cage) Fig 16
Tighten the front where it clamps to the front cross bar snug. (Fig 19)