Installation Manual

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 W Artesia, Compton, CA 90220
Revised 9.28.11
Installation Instructions:
(Part # SB76900)
1997-2006 Jeep TJ
SRC 6-Piece Roll Cage Kit
Step 9: Install the overhead bar (94-8213) over the OE driver and passenger side support
bars. Secure the overhead bar to the side support bars using the (90-4344) clamp halves, and
(8 per side) 5/16” X 7/8” bolts. NOTE: If the overhead bar (94-8213) will not fit properly
loosen the side support hardware to achieve proper alignment.
Step 10: Install the main support cage mounts to the OE cage main support hoop . (94-
4408).
Step 11:
Slide the overhead bar (94-8213) back and interlock the clamps with the Main Sup-
port cage mounts (94-4408). Secure using the (2 per side) supplied 5/16” x 1 1/4” bolts.
94-8213
Overhead Bar
94-8213
Overhead Bar
90-4344
Clamp Halves
(8) 5/16” X
7/8” Bolts
94-4408 Main Support
Cage Mount
94-8213
Overhead Bar
Main Cage
Support
Main Cage
Support
(2) 5/16” X 1
1/4” Bolts