Installation Manual

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220

NOTE: Please read instructions entirely and thoroughly before assembling and installing

this product

This bumper

is rated with a

Class IV

receiver.

(9,000lbs

GVWR)

Note: Check with OEM towing specifications and operation

before towing anything with your vehicle.

Note: Check with OEM towing specifications and operation

before towing anything with your vehicle.

PAGE 1
NOTE: Please read instructions entirely and thoroughly before assembling and installing this product This bumper is rated with a Class IV receiver. (9,000lbs GVWR) Note: Check with OEM towing specifications and operation before towing anything with your vehicle.
PAGE 2
For Technical Support/Warranty Information please call 310-762-9944 Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
PAGE 3
For Technical Support/Warranty Information please call 310-762-9944 Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
PAGE 4
For Technical Support/Warranty Information please call 310-762-9944 Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
PAGE 5
Step 9: Install the tire carrier (90-5612) cover plate to the top of the bumper using the supplied 3/8” x 1 “ bolts and hardware.
PAGE 6
Product cleaning and maintenance instructions Dual state powder coat finish – Mild soap, window or glass cleaner may be used to clean the finish. In order to protect the finish, you may wax your product on a regular basis with pure carnauba automotive wax. Do not use any types of soap, polish or was that contains abrasive that could damage the finish. Textured coated finishes should be cleaned with a mild soap on a damp sponge. Do not apply polish or was that requires to be removed by means of buffing.