Installation Manual

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
CARE AND MAINTANCE INFORMATION
We recommend normal cleaning by using mild soap and water also applying a non-abrasive aluminum polish on a regular schedule.
(Taking into consideration your climate and driving time and conditions.)
Limited Warranties
Smittybilt’s products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and
finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its
products are free from defects in material and workmanship. All other warranties and representations express or implied, are hereby disclaimed, including fitness for
merchantability and buyer’s intended use or purpose. All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the
selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse,
improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. Smittybilt is
not responsible for items damaged during shipping. This warranty is not transferable from the original buyer. For the original Buyer to be eligible for the limited
warranty coverage, the Buyer must provide proof of purchase.
Customer’s remedy hereunder shall be limited only to repair or replacement (at Smittybilt’s option) of any defective part(s) returned to Smittybilt at customer’s
expense. The determination of whether or not a returned part is defective or subject to coverage under the limited warranties stated herein shall be made at
Smittybilt’s sole discretion.
Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage Powder Coating Products -
Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty for a period of (5) years or 50,000 miles (whichever occurs
first) from date of purchase against workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of purchase shall, if
accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a replacement product equal to fifty percent (50%) of customer’s initial purchase
price.
To assure product quality, Smittybilt reserves the right to change product design, material, specification and finishes without prior notice to customers. This limited
warranty gives you specific legal rights and you may also have other rights, which may vary from state to state. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitations may not apply as to you. Also, some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. Smittybilt reserves the right to discontinue product lines and substitute products, or provide
other remedies than those listed in this limited warranty for those discontinued products.
Warning
Rollover and other types of vehicle accidents may result in serious injury or death to you, your passengers and others sharing the road. Smittybilt accessories are
decorative and are not intended to reduce or avoid injury or damage in the event of an accident. The weight and location of Smittybilt accessories may affect your
vehicles’ handling, stability and performance, creating an increased risk of accident or rollover. Before installing any accessory, check state laws and assure that the
accessory will not obscure any lights or interfere with proper operation on your vehicle’s safety equipment. Consult your owner’s manual and the Smittybilt
instructions, or additional safety information. Smittybilt products, nor the warnings contained herein, are not a substitute for your safe driving. Don’t drink and
drive, always use seat belts and don’t drive faster than conditions permit.
Installation Instructions
M1 Wire Mesh Grille
(Part #615832)
09-on Ford F-150
You will need to cut out portions of your OEM grille in order to install this part.
 Make sure shell is placed on a clean surface
 Use the M1 grille to determine the appropriate parts of the OEM grille shell that will need to be
cut out
 Most applications require a lip to be left on the grille shell in order to attach the included brackets
 Tape off all areas that will be cut to protect the finish of the grille shell
 Use extreme caution when cutting or drilling
 Its recommended to cut a little large and then trim access where needed
 Clean all cuts with a file
 Once cut, check fitment of grille and brackets to determine if more of the shell needs to be cut out