Installation Manual

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 W. Artesia, Compton, CA 90220
Installation Instructions:
(Part # SB612830)
2008-2010 Ford Super Duty
F-250/F-350 M1 Front Bumper Kit
Revised 6.30.11
Step 13: Insert the provided jack pad (93-7484) into the bottom of the new M1 front bumper
(93-7290). (Fig H)
Step 14: Using a floor jack, carefully raise and install the new M1 front bumper (93-7290)
assembly to the bumper horn mounts (93-7311) using (4 per side) 1/2” x 1 1/2” bolts and
hardware. (Fig I)
NOTE: Leave the hardware loose until all the bolts are started.
NOTE: Mounting system allows for three axis adjustment for best fit.
Step 15: Connect the winch and fog lights wiring connectors to the connectors on the vehi-
cle. Test, aim & adjust the fog lights at this time. (Fig J)
Fig. H
93-7484
Jack Pad
93-7290
M1 Front
Bumper
Fig. I
93-7290
M1 Front
Bumper
1/2” X
1 1/2”
Bolts
1/2” X
1 1/2”
Bolts
93-7311
Horn
Mounts