Installation Manual

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 W. Artesia, Compton, CA 90220
Installation Instructions:
(Part # SB612830)
2008-2010 Ford Super Duty
F-250/F-350 M1 Front Bumper Kit
Revised 6.30.11
Step 10: Install the fog lights into the new M1 front bumper (93-7290) using the supplied (8
per side) 1/4”-20 X 3/4” bolt and hardware. (Fig E)
Step 11: Install the window backing (93-7314 drvr and 93-7315 pass) and bezels (90-7316
drvr and 90-7317 pass) to the new M1 front bumper (93-7290) using (4 per side) 10-24 X
3/4” stainless button head bolts and #10 hardware. (Fig F)
Step 12: Install bumper horn mounts (93-7311) on both driver and passenger sides frame
rails using the supplied (3 per side) 1/2” x 1 3/4” bolts, (2 per side) 1/2” X 1 1/2” bolts and
1/2” hardware. Leave the hardware loose at this time. (Fig G)
Fig. G
1/2” X
1 1/2”
Bolts
1/2” X
1 3/4”
Bolts
Frame
Rail
93-7311
Horn
Mounts
Fig. F
93-7314 drvr and 93-7314
pass Window Backing
93-7314 drvr and
93-7314 pass Bezels
(4) #10-
24 X 3/4”
Stainless
Bolts
93-7290 M1 Front Bumper