Installation Manual
WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
SMART COVER
(Truck Bed Cover)
Step 7: Insert locking pins into front clamps. (Fig F)
(Fig C) (Fig D) (Fig E)
(Fig F) (Fig G) (Fig H)
Step 8: Unfold the cover so it’s completely laid out on top of your vehicle. Repeat steps 5 thru 7
on the two rear clamps. (One per side) Installation of Smart Cover is now complete.
Tacoma/Tundra (Only)
Slide the retainer plates into the side channels on the vehicle bed. ( 2 per side, 1 goes in front and
1 in back) Fig G
Attach the clamp bracket to the plate with the included allen head hardware. (Fig H)
Line the bracket up with the Smart Cover clamp location once they are lined up secure bracket to
the vehicle bed rail.
Secure Smart Cover latches to these brackets.