Operator's Manual

82
RefeRences and TRoubleshooTing
RefeRences and
TRoubleshooTing
Default Factory Settings
The first time you use the pump, the protocol is set to the factory default. You may reset the pump to the
factory default at any time. Refer to the Administrator Settings Guide for more information on how to reset
the pump to the factory default. The factory default is a manual mode programming, see page 51.
The following chart details the factory default parameters:
Parameter Default Factory Setting
Programming Units mL
Continuous Rate On/Off Off
Continuous Rate 0 mL/hr
PCA Dose On/Off Off
PCA Dose 0 mL
PCA Lockout 1 hour
Intermittent Bolus On/Off Off
Max Delivery Rate 175 mL/hr (combined bolus + continuous)
Delivery Limit Method Not in Use
Reservoir Volume 1 mL
Reservoir Reset Volume 100 mL
Clinician Bolus 0 mL
Pump Stopped Alarm Type Informational
Reservoir Low Trip Point 5.0 mL
Reservoir Low Alarm Type Insistent and One Time Only
Air Detector On/Off On
Air Detector Sensitivity Low
Upstream Sensor On/Off On
Downsteam Sensor Sensitivity Low
PM Reminder Off
Reservoir Empty Alarm Type One Time Only
Keypad Code 201
Clinician Code 997
Admin Code See your PharmGuard® system administrator
Manual Programming Security Admin Code
Keypad Security Code only
Time Format 24:00:00
Date Format Month/Day/Year
Backlight Intensity 3
Alarm Volume High
Sound Theme Standard
Key Beep On/Off On
Numeric Format 1,234.56
Color Theme Black (manual mode programming)