Operator's Manual

Programming and oPeration

Programming

and oPeration

Note: If the hourly limit or the max doses/hr settings are not visible on the Home screen, your facility’s

PharmGuard® system administrator has chosen not to require a delivery limit beyond the PCA lockout.

To edit the max doses/hr:

1. From the Home screen, press U or D to choose Max Doses/Hr and

press S.

2. Unlock the keypad using the security code or the pump key.

3. Press U or D until you reach the desired max doses/hr value and

select Save.

Reservoir Volume

The reservoir volume is a program setting that allows you to set the amount of ﬂuid that is contained in the

reservoir. Once you set this number, the software keeps track of how much ﬂuid is delivered and adjusts the

reservoir volume accordingly.

The pump must be stopped to adjust the reservoir volume amount.

To edit the reservoir volume:

1. From the Home screen, press U or D to choose Reservoir Vol, and

press S.

Note: If a protocol was running and medication was delivered, a

conﬁrmation screen appears showing the amount remaining in the

reservoir volume. Select Yes to adjust the reservoir volume.

2. Unlock the keypad using the security code or the pump key.

3. Press U or D until you reach the desired reservoir volume and select

Save.

You may press S to reset the pump to a default amount which

appears on the screen in blue text, under the current value. In this

example, pressing S resets the reservoir volume to 100 mL.