Operator's Manual

43
Programming and oPeration
Programming
and oPeration
Event Log
The event log records the following types of events: hourly given totals, dose delivery, alarms, error codes,
power source changes (including power losses), cassette changes, protocol library changes, and changes to
pump programming or settings. The pump records the time and date of each event, and lists events in order,
with the most recent at the bottom of the screen through the last 5000 events. When the event log reaches
5000 events, and a new event occurs, the oldest event is replaced with the next oldest event in order of
occurrence.
The event log can be viewed at any time, with the pump running or stopped. The event log is maintained
by an internal back up battery during and after the pump is powered off or when the pump loses power
unexpectedly due to removal or depletion of power source (AC adapter, AA alkaline batteries, rechargeable
battery pack, or communication module).
To view the event log:
1. From the Home screen, select Reports.
2. From the Reports menu, press U or D to choose Event Log and
press S.
While viewing the event log, you may quickly
scroll from the oldest to newest by selecting
Show Oldest or Show Newest.
Daylight Saving Time
When the pump is configured by your PharmGuard® system administrator to
automatically change time due to daylight saving time, this screen displays
time change information. If this screen states that the feature is disabled, time
can be updated manually on the pump.
For more information about time changes and when automatic time changes
will occur on the pump, see page 34.
To view the daylight saving time information:
1. From the Home screen, select Reports.
2. From the Reports menu, press U or D to choose Daylight Saving Time
and press S. This option is also available from the Set Time and Date
screen.
Protocol Library Summary
The protocol library summary allows you to view the protocol library currently
installed in the pump. This screen tells you the name of the protocol library,
the revision, and the number of protocols in the library.
To view the protocol library summary:
1. From the Home screen, select Reports.
2. From the Reports menu, press U or D to choose Protocol Library
Summary and press S.