Operator's Manual

38
Programming and oPeration
Programming
and oPeration
Turn Wireless On/Off
When the pump has a CADD®-Solis Communication Module
installed, its wireless radio can be turned off (and on) as
necessary. The wireless capabilities are used to allow the pump
to communicate to a PharmGuard® Server system (i.e., sending
pump data to the server, and receiving pump library and software
updates from the server).
Note: The clinical functions of the pump are not affected by the
pump’s wireless on/off status. Wireless can be turned off or on
without affecting pump delivery. When wireless is turned off,
the pump retains delivery history data within the pump which
will be communicated to the PharmGuard® Server system
automatically later when wireless is turned on and connectivity
to the server is established.
To turn wireless capabilities on or off:
1. From the Home screen, select Tasks.
2. Press U or D until Turn Wireless On/Off is highlighted and press S.
3. Press U or D until the desired setting is highlighted and select Save.
The wireless indicator in the pump display (below the keypad lock status)
shows wireless and connectivity status:
Wireless Off
Wireless Off
(white indicator)
Wireless On
Wireless On, not associated with wireless access point
(orange indicator)
Wireless On, associated with wireless access point
(orange indicator with green center)
Wireless On, associated with wireless access point,
and communicating with PharmGuard® Server
(green indicator with green center)
Adjust Admin Settings
The administrator settings contain pump configurations that are set up by the PharmGuard® system
administrator. Protocol libraries are created using the PharmGuard® Medication Safety Software. The
administrator settings only allow you to make changes to the protocol currently displayed.
To access the administrator settings:
1. From the Home screen, select Tasks.
2. From the Tasks menu, press U or D to choose Adjust Admin Settings
and press S.
Note: You cannot access the administrator settings without the
administrator code.
See the Administrator Settings Guide for more information.
CADD®-Solis
Communication
Module (Model
2130 or 2131)