Operator's Manual

19
General Description
General Description
Polemount Swivel
The polemount swivel allows the pump to rotate while it is attached to the CADD
®
-Solis
polemount bracket. With the swivel attached, the pump can be tilted or rotated 230° for easy
viewing of the display. The swivel can not be used in a LockBox.
Pouches and Backpacks
Several styles of pump pouches and backpacks are available. They can carry a
CADD
®
-Solis ambulatory infusion pump with either a CADD
™
medication cassette
reservoir (50 mL to 250 mL) or a flexible, plastic IV bag up to 3 liters.
LockBox
Clear and yellow lockboxes are available to hold both the CADD
®
-Solis ambulatory infusion
pump and a CADD
™
administration set or high flow administration set. The pump attaches to
the lockbox with a polemount bracket adapter, and the lockbox can be attached to an IV pole.
The lockbox allows for viewing of its contents and access to the keypad, remote dose cord
jack, and AC power jack.
PharmGuard® Medication Safety Software
PharmGuard® Medication Safety Software is PC software that allows you to create and manage protocol
libraries and then send them to the pump. For more information, see the installation guide and online help
for PhamGuard® Administrator software and PharmGuard® Point of Care software.
PharmGuard® Server Software
When a CADD®-Solis pump has a CADD®-Solis Communication Module installed (see page page 17),
the pump can communicate with a wireless access point at your facilty and to a PharmGuard® Server
for reporting and administration purposes. When the CADD®-Solis pump has wireless turned on and
a wireless access point is in range, the pump sends history data to the server periodically, and can also
receive authorized pump firmware and library updates from the server. For more information, contact your
PharmGuard® Server system administrator.
SureLink® Remote Support Software
The CADD®-Solis Ambulatory Infusion Pump is upgradeable (when updates are available from Smiths
Medical) using SureLink® Remote Support Software – PC Direct Connect. This application, available
separately, may be used to receive available pump software updates from Smiths Medical Customer Service
via the Internet and install those updates onto eligible pumps via USB connection. For more information
about using SureLink® Remote Support Software, see the documentation provided with the software.
CADD®-Solis Network Setup Utility Software
All wireless and network configuration for the CADD®-Solis Communication Module is set using the
CADD®-Solis Network Setup Utility software. This software, available separately, programs the CADD®-Solis
Communication Module via USB connection to the CADD®-Solis pump. For more information about using the
CADD®-Solis Network Setup Utility Software, see the documentation provided with the software.
The configuration settings are stored by the pump and not the communication module. A pump may be
configured for wireless without a communication module installed. The communication module will obtain
configuration settings upon pump power up after the communication module is installed in an already
configured pump. The communication module settings are not retained once it is removed from a pump.