Manual

13
Carefully inspect the loaded round to determine if its bullet
has started to unseat (move forward) from its casing.(Figure 2)
If it has, you should not use the tested ammunition in your
revolver. Chose another projectile weight or brand of
ammunition and repeat this test until you find one that
DOES NOT UNSEAT under these test conditions. When you
are finished, fully unload your revolver and secure it safely.
PROPER
CARTRIDGE
CARTRIDGE WITH
UNSEATED
PROJECTILE
CASE MOUTH
PROJECTILE
AMMUNITION WARNING
FOR Ti, Sc, PD Series
REVOLVERS
Before placing any of these reduced weight revolvers into
service, perform the following test to determine the
suitability of the ammunition you intend to use.
At a gun range or other suitable and safe location, prepare your
revolver for firing by fully loading its cylinder with the ammunition
to be tested. While pointing the firearm in a safe direction, fire all
but the last round. Remove the empty casings and the last
loaded round from the revolver’s cylinder.
FIGURE 2
AMMUNITION WARNING
ALL SCANDIUM REVOLVERS FIRING
MAGNUM AMMUNITION
(Example: All model 340’s, 360’s, 386’s)
To reduce the possibility of premature cylinder
erosion, do NOT use Magnum
®
loadings with
bullet weights less than 120 gr.