Manual

DISASSEMBLY (see Figure 27)
1. Remove all cartridges from the magazine.
2. Using a drift punch, depress floorplate catch (1) through hole
in magazine floorplate (2).
3. Slide magazine floorplate (2) out of magazine tube (3)
while holding floorplate catch (1) in the magazine tube (3).
4. Remove floorplate catch (1) and magazine spring (4) out
through bottom of magazine tube (3).
MAGAZINE DISASSEMBLY
FIGURE 25
(3)
(4)
(1)
(2)
23
FIGURE 27
FIGURE 26
ASSEMBLY (see Figure 27)
1. Install magazine spring (4) and floorplate catch (1) in
magazine tube (3) in exactly the same orientation as they
were when they were first removed during disassembly (as
explained above).
2. While holding floorplate catch (1) in magazine tube (3), slide
magazine floorplate (2) into magazine tube (3) so that the
round projection of the floorplate catch (1) engages the
magazine floorplate (2).
MAGAZINE ASSEMBLY
FIELD STRIPPING REASSEMBLY CONT’D.