Manual

16
LOADING
Do not load the pistol until you are about to fire.
Keep your finger outside the trigger guard until you are ready
to fire.
WARNING: These Smith & Wesson centerfire pistols
will fire with the magazine removed. Keep your fin-
ger off the trigger and outside of the trigger guard
until you have made the commitment to fire.
Only use Smith & Wesson magazines specifically
manufactured for your particular model of pistol. Do not
interchange magazines from one model pistol into another
model pistol.
Smith & Wesson has provided you with a magazine
designed to operate in your specific model of pistol. While
your magazine may be able to be inserted into another
model pistol, it will only function properly in the specific
model for which it was designed.
•Follow instructions in this manual and any other specific
instructions which may be marked onto, or accompany, a
magazine. Failure to use the particular type of Smith &
Wesson magazine specified for your model and caliber of
pistol may result in a malfunction.
Load the magazine by pressing a cartridge head (rear of
cartridge) downward on the forward portion of the magazine
follower (or downward on the case of the previously loaded
cartridge) and sliding the cartridge fully under the lips of the
magazine until the cartridge head is against the rear wall of
the magazine. (Figure 9) Repeat the procedure for the
number of cartridges you wish to load, up to the magazine
capacity. Do not attempt to load your magazine with more
than the specified number of cartridges because doing so
can cause a feeding failure.
Hold the pistol in one hand with the muzzle pointing in a safe
direction and with your finger off the trigger and outside the
trigger guard. Insert the loaded magazine into the magazine
well of the pistol until it is locked in place.
WARNING: Do not use excessive upward force when
inserting a loaded magazine into the pistol. Excessive
upward force could cause the slide to move forward,
chambering a round and making the pistol ready to fire.
FIGURE 9