Manual

18
UNLOADING
• Set safety selector lever to “SAFE”
• Press magazine release and remove magazine. (Figure 15)
• Pull charging handle to rear and push in lower portion of bolt
catch. If a round had been in the chamber it should have
been ejected. If last round had been fired, bolt and carrier
should already be held to rear, provided magazine is in place.
• Look into the chamber through ejection port to ensure
chamber is empty. (Figure 16)
• Remove remaining live rounds by sliding them forward and
out of the magazine.
• Collect live ammunition for safe storage and spent cartridge
cases for disposal.
FIELD STRIPPING
DISASSEMBLY
WARNING: ALWAYS KEEP THE BARREL POINTED IN
A SAFE DIRECTION.
WARNING: ALWAYS FOLLOW THE FIELD STRIPPING
INSTRUCTIONS EXACTLY. NEVER DO ANYTHING
BEYOND WHAT YOU ARE SPECIFICALLY INSTRUCT-
ED TO DO IN THIS MANUAL. NEVER ALTER OR MOD-
IFY THE PARTS IN YOUR FIREARM.
WARNING: WEAR SAFETY GLASSES EVERY TIME
YOU ASSEMBLE OR DISASSEMBLE YOUR FIREARM.
•
Ensure that magazine is removed and the firearm is not
loaded so that it will not fire.
• Push the top of the bolt release to ensure that the bolt is in
the forward position.
FIGURE 15
FIGURE 16