Manual

WARNING: MAGAZINE SPRING IS UNDER PRES-
SURE. CONTROL THE SPRING AND FOLLOWER SO
THAT THEY DO NOT FLY OUT AND CAUSE INJURY.
26
DISASSEMBLY (Figure 34)
1. Using a drift punch, depress floorplate catch through hole
in floorplate.
2. Slide floorplate forward off of the tube while holding floorplate
catch in the tube.
MAGAZINE
Tube
FIGURE 34
ASSEMBLY (Figure 34)
1. Install magazine spring and follower and floorplate catch front
to back into the tube in exactly the same orientation as they
were in when they were first removed during disassembly.
2. While holding floorplate catch in tube, slide floorplate onto
the tube so that the round projection of the floorplate catch
engages the floorplate. There will be a audible “snap” heard.
Spring
Floorplate
Catch
Floorplate
Follower
WARNING: WEAR SAFETY GLASSES EVERY TIME
YOU ASSEMBLE OR DISASSEMBLE YOUR MAGAZINE.
3. Remove floorplate catch and spring and follower out through
bottom of tube.
4. Turn tube right side up and remove spring and follower
through bottom of the tube.