Manual

WARNING: MAKE SURE THE HANDGUN IS
UNLOADED BEFORE CHANGING THE
BACKSTRAP.
• If the backstrap currently on your pistol
does not fit your hand comfortable, you
can install one of a different size and
shape. Remove the frame tool
from the bottom of the grip by rotating
it 1/4 turn (either direction) and pulling
it out of the frame. (Figure 30) Take the
current insert off the handgun and
replace it with the appropriate insert.
(Figure 31)
• Replace the frame tool.
• Caution: Some solvents may cause
damage to the backstraps. See the
“Cleaning and Maintenance” section of
this manual for more information.
REPLACING
THE BACKSTRAP
• The rear sight is adjustable for windage only. To
adjust, move the rear sight in the direction you wish
the group to move on the target. For example, if the
group should move to the right, move the rear sight
to the right. Use a brass or plastic drift or punch to
prevent marring the rear sight. If the rear sight has
a set screw, loosen the set screw prior to moving
the rear sight. Tighten the set screw after the sight
has been adjusted to the desired position.
SIGHT ADJUSTMENT
WARNING: NEVER RELY ON THE INTERNAL LOCK
MECHANISM AS THE SOLE METHOD TO SECURE
YOUR FIREARM FROM UNAUTHORIZED USE.
WARNING: IT IS YOUR RESPONSIBILITY TO CONTIN-
UOUSLY EXAMINE YOUR PERSONAL SITUATION TO
PROVIDE A SUFFICIENT LEVEL OF SECURITY TO
KEEP UNAUTHORIZED USERS FROM FIRING THE
FIREARM.
• This feature prevents the pistol
from firing when locked.
• To lock the pistol, insert the key
(Figure 32) and turn it clockwise.
•
T
o unloc
k the pistol, inser
t the
key and turn it counterclockwise.
(Figure 32)
INTERNAL LOCK OPTION
24
FIGURE 32
FIGURE 30
FIGURE 31
Your M&P pistol may be equipped with an internal lock.
If it is, please follow the instruction below.