Manual

23
RE-ASSEMBLY/
FIELD STRIPPING
WARNING: WEAR SAFETY GLASSES EVERY TIME
YOU ASSEMBLE OR DISASSEMBLE YOUR SHOTGUN.
Before assembly, apply a light film of quality gun oil to all
metal parts.
Verify that the barrel is clear and free of obstructions.
Holding the barrel assembly in one hand and the butt
stock/receiver assembly in the other, engage the hinge pin
pivots onto the hinge trunnions inside the receiver.
Rotate the barrels upward to close the action. You will feel
and hear a detent when the shotgun is fully closed.
Place the rear of the fore-end iron against the receiver.
Align the fore-end latch hook into the receiver and carefully
snap the fore-end into place.
Push the fore-end lever down - flush with the fore-end sur-
face.
WARNING: NEVER RELY ON MECHANICAL FEA-
TURES ALONE. ONLY YOUR SAFE GUN HANDLING
WILL ENSURE THE SAFE USE OF YOUR FIREARM.
THIS IS YOUR RESPONSIBILITY.