Manual

FIGURE 17
FIGURE 18
21
WARNING: The recoil spring is under pressure.
Control the recoil spring and the guide so that they
do not fly out and cause injury.
• Allow the slide to move forward until it is aligned with the
frame in its normal closed position. Pull the slide forward off
the frame while grasping the recoil spring assembly and slide
together as shown in Figure 19. Remove the recoil spring
assembly by depressing the spring slightly and releasing it
carefully from the small radial undercut in the barrel lug.
Remove the barrel from the slide. Figure 20 shows the parts
you will have after field stripping.
NOTE:
No further disassembly is recommended, as the pistol may be
properly cleaned and lubricated when field-stripped as
described above.
FIELD STRIPPING DISASSEMBLY CONT’D.
FIGURE 20
FIGURE 19