SMITH & WESSON 22 AUTOMATIC Model No. 46 PARTS LIST • INSTRUCTIONS FOR USE • MAINTENANCE SPECIFICATIONS • GUARANTEE MM SIGHT ASSEMBLY .... . SMITH & WESSON, INC. SPRINGFIELD, MASS., U.S.A.
SMITH & WESSON .22 AUTOMATIC PISTOL - MODEL No. 46 PARTS LIST PRICES EFFECTIVE JANUARY " 1960 - No. Name 5102 5103 5104 Rear Sight Elevation Nut. Rear Sight Plunger Spring. 5105 5106 5107 Rear Sight Spring Clip .. Rear Sight Elevation Stud Rear Sight Windage Nut Magazine Catch Plunger. Main Spring Magazine Catch Spring Trigger 6041 6045 6069 6507 6508 6509 6513 6514 6515 Subjec:t to Change Without Notice - ......$ Rear Sight Plunger Bolt Bolt Pin . Ex'tractor Plunger. Extractor Spring.
LOADING AND 1. Pull slide to rear until it locks open. 2 Press magazine catch nut on left side of frame back of trigget guard and drop magazine into the hand. 3. Holding the magazine in tbe hand, depress tbe follower with the buttons pro· vided for the purpose and drop in or load the desired number of cartridges. These must be loaded with the primer to the rear, or flat edge of tbe magazine, and the bullet to tbe front or rounded edge of tbe magazine.
SIGHT ADJUSTMENT 1. from sight is fixed. All adjustments must be made at the rear sight. 2. Move the rear sight in che direction in which you wish rhe group on the targct co move. (If group must be higher, elevate the rear sight. If group must go to the right, move the rear sight [Q the right, etc.) 3. To elevate rear sight turn top (elevating) screw to the left. Or counter-clockwise. To depress rear sight turn top (elevating) screw [Q the right. or clockwise. 4.
