Manual

!! WARNING !!
Ensure your firearm is unloaded before beginning to clean it
(See Unloading Section). Always follow the rules of safe
gun handling.
Your firearm is a precision instrument. To insure reliable
function it is necessary to follow a routine maintenance
procedure. After firing your handgun, be sure to unload it
following the procedure outlined in the section entitled
“Unloading” before performing any cleaning or maintenance
procedure.
Your handgun should be cleaned by brushing the barrel bore
and chamber (charge holes) with a good powder-removing
solvent and bore brush. Wipe the areas clean with patches or
a swab.
CLEANING AND
MAINTENANCE
24
FIGURE 36
FIGURE 35
•The rear sight is fully adjustable
for both windage and elevation.
The top screw controls the
elevation and each click raises
or lowers the point of impact at
the target. The windage adjust-
ment screw, located on the right
side of the body, controls the
windage and each click moves
the point of impact right or left
at the target.
REAR SIGHT
ADJUSTMENT
Key
MAGAZINE REASSEMBLY CONT’D.
FIGURE 34
FIGURE 33