Aegean® - EC models Installation, commissioning and user manual SFC 235 | SFC 260 | SVFC 500 Issue 008 | March 2023 ENGLISH | UK | IRL | SmithsEP.co.
Contents Introduction 2 Declaration of conformity 3 Symbols used in this guide 3 Important safety and installation instructions 4 Product Information 6 Installation 9 Introduction Declaration of conformity Symbols Smiths Aegean Fan Coil Unit (FCU) is designed for heating, cooling and/or ventilating rooms. The inlets and outlets of the unit are positioned in such a way that the discharged airflow is distributed evenly across the room without causing discomfort to the people in it.
Important safety and installation instructions Prior to installation, read these installation and operating instructions. The installation and operation should also be in accordance with national regulations and accepted codes of good practice.
Product dimensions and performance data SFC 235H SFC 260H 845 790 Model/size 21 235 80 235 110 52 52 Airflow A B direction A B Wt(kg) 570 800 32 1100 43 235 110X 870 1100 46 235 140 1170 870 1400 54 235 170 1470 1700 69 235 200 1770 2000 86 235 230 2070 2300 92 Model/size Standard spigot locations 52 235 80 235 110 Heating Cooling Return Flow 235 H C 118 198 Drip Tray 15mm Condensate drain 125 80 200 A 1 B Speed controls 110/ A 100X 1 140 A 1 400 2 3
Product dimensions and performance data Installation 3. Connecting ducts SVFC 500 1. Fixing Careful consideration to the external resistance is given during the fan coil unit selection process. The external resistance, normally expressed in Pascal’s (Pa), is based primarily on the length and number of bends in the flexible ductwork connected to the fan coil unit.
2. Do not squash the ducts so that they can pass easily under or around obstructions that appear to be affecting their natural course. See Figure 3. Fig. 3 3. Avoid using more ducting than is necessary. Using more ducting than is required means that the internal spiral will not be stretched enough and result in uneven airflow patterns causing increased resistance and sound levels. See Figure 4. NOTE: Damage caused by exposure to frost is NOT covered by the warranty. 6.
Maintenance Item ITEM Description NO. DESCRIPTION No. 1 1MainMain bodyBody 13 QTY QTY.
Fault finding Registering your product Disposal In the event of any difficulty, please contact us on +44 (0) 1245 324560. Thank you for purchasing a Smith’s product. It has been designed and manufactured to the highest quality standards to ensure it gives you efficient and trouble-free service for many years. We are committed to achieving the highest standards and our faith is supported by a free parts and labour guarantee with every product.
Happy to help Smith’s Environmental Products Ltd is one of the leading manufacturers of heating and cooling products in the UK. We are committed to achieving the highest standards and our faith is supported by a free parts and labour guarantee with every product (see our website for more information). Our customer service is second to none and we are happy to offer any help and guidance that you might need.
