Instructions / Assembly

1. Assemble Hose To Tank

IMPORTANT: Do not attempt to heat or alter

hose, hose nut, or barb prior to assembly.

1. Align hose barb tabs, push hose barb into tank

until it stops (See Figure A).

2. Slide hose nut into place and turn clockwise to

tighten. (See Figure B).

NOTE: Do not use tools to tighten hose nut.

Figure A Figure B

3. Assemble Shut-o to Wand

Screw on Wand Assembly to end of Shut-o

and tighten securely. (See Figure D)

2. Assemble Wand & Nozzle

Place nozzle onto the end of the

wand assembly and tighten securely.

(See Figure C)

Conguration for

nozzle tip sprayers

Figure C

Figure D

SETTING UP YOUR

BLEACH SPRAYER

190447

PAGE 1
SETTING UP YOUR BLEACH SPRAYER 190447 1. Assemble Hose To Tank IMPORTANT: Do not attempt to heat or alter hose, hose nut, or barb prior to assembly. 1. Align hose barb tabs, push hose barb into tank until it stops (See Figure A). 2. Slide hose nut into place and turn clockwise to tighten. (See Figure B). NOTE: Do not use tools to tighten hose nut. Figure A 2. Assemble Wand & Nozzle Place nozzle onto the end of the wand assembly and tighten securely.
PAGE 2
PARTS INCLUDED WITH YOUR BLEACH SPRAYER 190447 182491 SHUT-OFF ASSEMBLY 181884 21” POLY WAND ASSEMBLY 181822 ADJUSTABLE NOZZLE POLY 180097 NOZZLE TIP HIGH VOLUME (RED) 180168 NOZZLE TIP LOW VOLUME (YELLOW) 181812 NOZZLE FLAT SEAL COMPRESSION SPRAYER Use and Care Manual Lifetime Limited Warranty On Tank and Frame, 1 year on parts and accessories. Garantia limitada de por vida ensamblaje de tanque 1 año de garantía en piezas y accesorios.