Use and Care Manual

5
Installation instructions for built in application
RW270DR – 89 Bottle Dual Zone
Step 3. Using a Philips head
screwdriver, push on the screw at the
top of the door to make sure it’s
protruding through the hole as far as
possible and screw in to the appropriate
hole on the handle. Do not fully
tighten the screw into the handle at
this point as it will make attaching the
lower portion of the handle difficult.
Once the upper screw is screwed into the
handle, screw the bottom portion into
the handle. Tighten top and bottom
screws so that they are both snug and
handle is firmly affixed to the door.
Do not over torque the screws.