Use and Care Manual

a small flat head screwdriver.

2. Using a Phillips head screwdriver, loosen screws (3b) to remove the hinge support rod (9)

at the bottom of the door. Rotate the door 180

so that the top is now the bottom and vice

versa. Attach the bottom hinge support rod (9) to the bottom corner of the door and attach

with screws (3b).

3. Using a flat head screwdriver, pry off the bottom hinge cover (12). Using a Phillips head

screwdriver, loosen and remove screws (3c) and (13) and bottom hinge (10).

4. Move bottom hinge (10) to the opposite side and re-insert all screws (3c) and (8). Bottom

hinge cover (12) should clip back onto the bottom hinge (10).

5. Place the washer (11) over the hinge support rod (9) and place the door back on the bottom

hinge by aligning the hinge support rod (9) with outer hinge hole on the bottom hinge (10).

6. Re-attach top hinge (4) using screws (3a). Insert lock cap (6), screws (7) and (8), and clip

on hinge cap (2).

There is no need to alter the location of the handle as it is centered on the door.

Wine Refrigerator Quick Start

The control panel of your wine or beverage cooler has a saftey feature that prevents

someone from accidentally changing the temperature or shutting the appliance off. If

left untouched for 10 seconds, the control panel will lock and be unresponsive to touch.

To unlock your appliance, press both power and light at the same time and hold for 5

seconds and wait until you hear the appliance beep. The display will unlock and allow

you to change the temperatures and turn the lights on or off. Leave the display alone

for 10 seconds and it will return to a locked state and beep again indicating a locked

state.

Single Zone Control Panel: