User Guide

4-2 — Line Mode Smith Corona Corporation

Entering Text

Many of the features you use in Type Mode are active in Line Mode also.

Margins and tab settings are made in Type Mode.

Cursor Moves

Code + or Back Space — Moves cursor back through text.

Code + — Moves cursor forward through text.

Adv then

— Quickly moves cursor to the left margin.

Adv then — Quickly moves cursor to the space following the last

character displayed on the line.

Code + — Shows next approximately 38 characters of text.

Code + — Shows prior approximately 38 characters of text.

Code + — Moves typing position down equal to your line setting (i.e.,

if you are double spacing text, key moves typing position down two

lines). The line prints up to that point then moves the paper up.

Code + — Moves typing position up equal to your line setting (i.e., if

you are double spacing text, key moves typing position up two lines).

The line prints up to that point then moves the paper down.

NOTE: The / are repeating keys. If they are held down, the

paper will continue to move up or down.

Auto Return

You can program the Memory Typewriter to automatically print each

line of text when the right margin is reached. When a space or hyphen is

typed in the “warning zone,” which begins five spaces before the right

margin, text automatically prints, the carriage returns to the left margin

ready for the next line, and the display clears. For lengthy words falling

at the end of the line, simply type a hyphen as you normally would and

the carrier returns automatically. To activate Auto Return:

1. Press Code + Return (1). Unit beeps, and the Status Line prompts

Auto Return ON.

2. Type text. Do not press Return unless you want to force a new line to

begin before the margin is reached.

Deactivating Auto Return

Press Code + Return (1). The Status Line prompts:

Auto Return OFF.

Code