User Guide

2-8 — Page Layout Smith Corona Corporation
Line Spacing
You can select single line spacing, 1
1
⁄2 line spacing, or double line
spacing.
1. Press Code + Settings (7) to activate Settings (if not already
activated).
2. Press Return until the display prompts:
Set Line Spacing
3. Press Spacebar until the setting you want is displayed.
4. Press Return to select a setting and move to the next setting option,
or press Code + Settings (7) to deactivate Settings.
NOTE: If you change line spacing in Mem Mode, the entire
document prints in the new setting.
Impression Control
Impression Control adjusts the force used by the print hammer to strike
the typing paper. You can select Light, Medium, or Heavy print
impression. It is recommended that you select Heavy impression when
typing carbons or using a Script or Orator printwheel. For normal
typing, use medium impression.
1. Press Code + Settings (7) to activate Settings (if not already activated).
2. Press Return until the display prompts:
Set Impression
3. Press Spacebar until the setting you want is displayed.
4. Press Return to move to the next setting option, or press
Code + Settings (7) to deactivate Settings.
NOTE: Standard bond paper stock is recommended for best
quality. Copier paper, erasable bonds and very heavy
textured bond papers do not print well with Correctable
Film Ribbon. For these paper types, we recommend High
Density Correctable Film or Multi-Strike Ribbons. If
typing stencils, use those specifically designed for
daisywheel printers.