User Guide

Smith Corona Corporation Page Layout — 2-5
Changing a Special Tab to a Regular Tab
1. Select Type Mode.
2. Position print hammer on the Special Tab to be changed.
3. Press Tab S. The tab will change to a Regular Tab, and the unit will
beep once.
NOTE: This can also be done in Mem Mode when you are
recalling a saved file (see “Memory Mode”).
Changing All Tabs to One Special Tab
1. Select Type Mode.
2. Position the print hammer on left margin.
3. Press Code + Spec Tabs (8) until all tabs on the typing scale change to
the tab desired.
Changing All Special Tabs to Regular Tabs
1. Select Type Mode.
2. Position the print hammer on left margin.
3. Press Tab S. All Special Tabs are changed to Regular Tabs.
Removing One Tab Setting
1. Select Type Mode.
2. Position the print hammer on that tab location by pressing Tab (Tab C).
3. Press Code + Tab C (Tab). Release immediately. The tab symbol
disappears from the scale. One beep is heard.
Clearing All Tab Settings
In Type Mode, press and hold Code + Tab C (Tab) until 2 beeps are
heard. If you are positioned at a tab stop you will hear 3 beeps. All tab
symbols disappear from the scale. The display prompts:
All Tabs Clear