User Guide

5-2 — Spell-Right Dictionary Smith Corona Corporation

Using the Dictionary

The Spell-Right Dictionary is automatically activated when you turn on

your unit. When you mistype or misspell a word or type one that is not

found in it, two beeps sound and the Lock light flashes. Correct the word

using Correct or WordEraser. The corrected word will also be checked.

Turning the Dictionary Off/On

Sometimes you may want to turn the dictionary off. To turn it off:

1. Press Code + D. No beep is heard. The display prompts:

Spell-Right Off

Press Code + D to turn the dictionary back on. A beep is heard. The

display prompts:

Spell-Right ON

WordFind

When you type very fast, you may type a few words after you hear the

beep signal an incorrect word. WordFind will help you locate errors after

text is typed.

Using WordFind in Type Mode

In Type Mode, WordFind will search for misspelled words in the

correction memory. To use WordFind:

1. Press Code + Find (F). The print hammer glides back to the incorrect

word, and the Shift Lock light flashes.

2. Correct the word using WordEraser or Correct.

3. Press Code + Find (F) again to continue finding errors. When you

press Code + Find (F) and there are no more errors, the print hammer

automatically returns to your previous typing position.

Using WordFind in Memory Mode

In Mem Mode, WordFind locates errors throughout the document. You

can proofread an entire document from the first word forward or from

the last word backward.

1. Type the entire text, or recall a stored file.

2. Position the cursor at the beginning or end of your document.

3. Press Code + Find (F). The cursor moves to the error, a beep is heard,

and the Shift Lock light flashes.

4. Correct the word using WordEraser or Correct.

5. Continue to press Code + Find (F) to locate all errors.

Code

Find

Code

Find