User Guide

Smith Corona Corporation Type Mode — 3-9
Changing Pitch and Line Spacing
You can change pitch and line spacing within a document at any time.
You can change one setting or both. To change:
1. Press Code + Format (+/=) to access Format.
2. Press Return to select pitch.
3. Press Spacebar to select a new pitch.
4. Press Return to select line spacing, if desired.
5. Press Spacebar to select a new setting.
6. Press Code + Format (+/=) to return to Type Mode.
7. Change the printwheel, if necessary.
Indented Paragraph
Indent allows you to set “temporary left margins.” The example below
shows how Paragraph Indent is used to automatically indent five spaces
in the second paragraph.
National Accounting Seminar
Marvelous Paper Products will participate in the
National Accounting Seminar. We will focus on our
new computerized accounting program.
Those attending will include one Sales
Account Executive from each of our Sales
Districts, two System Consultants and two
Field Service Technicians.
Details will follow.
Setting Indent
1. Tab or space to desired indent location.
2. Press Code + Indent (I). A beep is heard. The status line prompts:
Indent ON
An “L” appears on the typing scale indicating the indent location.
3. Type the desired text. When Auto Return is active or when the
Return is pressed, the print hammer returns to the indented position.
4. Press Code + Indent to return to original left margin. The paper
advances one line and returns to the original margin. The display
prompts:
Indent OFF
Code
+
+
=
Format
Reloc
Return
(to select a different pitch)
Code
+
+
=
Format
Position Print Hammer
Code
+
I
Ind