User Guide

3-6 — Type Mode Smith Corona Corporation
Half Space
The Half Space feature can be used to make corrections no longer in
correction memory. When the Half Space feature is activated, the typing
position moves a half space to accommodate correct character spacing.
Regular spacing returns when the Half Space feature is deactivated.
Before activating the Half Space feature on another line, you have to
remove the error using off-line correction procedures. (See “Off-Line
Correction.”)
NOTE: When you activate the Half Space feature, the character
correction memory is erased. The typewriter remembers
the half spaced characters until the Half Space feature is
deactivated. Then, the typewriter begins to remember
normal spaced characters again.
Adding a Character
1. Position the print hammer on the incorrect word, and press Correct
or WordEraser to erase the error.
2. Press Back Space to position the carrier one space before the first
character of the erased word.
3. Press Code + Spacebar (Half Space). Print hammer advances a half
space.
4. Type correct word.
5. Press Code + Spacebar (Half Space).
Removing a Character
1. Position the print hammer on the incorrect word, and press Correct
or WordEraser to erase error.
2. Press Code + Spacebar (Half Space). The print hammer advances a
half space.
3. Type the correct word.
4. Press Code + Spacebar (Half Space).
Adding Another Character
Find
Quick brwn fox
Erase
Quick brwn fox
Back Space
Quick brwn fox
Correct
Quick brwn foxbrown
brown
Removing Another Character
Find
Quick broown fox
Erase
Quick broown fox
Correct
Quick broown fox