Users’ Manual SD2000 Date: Angus 3, 1997 Ad. Reproduction in whole vr in part is prohibited without the written consent of the copyright owner.
About this Manual The purpose of this manual is to give you the information of accessing the SD2000(IRD). into the following parts: Get ready to the SD2000(IRD) This is an overview of the ID's features and the remote control unit. Basic Operation This section explains how to select different channels and programs. Major features This section contains an overview of using the menu as a help guide on: . Using program access {parental control. . Displaying decoder information .
Get Ready to SD2000(IRD) Remote Control Unit 1. Insert two RE (AA size) batteries. Make sure they are correctly positioned. 2, Using the Remote Control Unit THIRD POWER: Switch between TV and IRD Z : Power MES Display the main menu a Move cursor Up/Down/Left/Right 0K « » Execute the menu highlighted function r Numeric keys Mute the sound Return to previous channel Volume control Channel Up/Down Users’ Manual SD2000 Dater January 22.
The SD2000(IRD) Font Panel Execute the menu highlighted function a rte ASA Power SD2000(IRD) Back Panel Move cursor Up/Down/Left Dual Audio Channel Up/down . Power Video Channel 3/4 switch To LNB 5 = T Antenna in ve power wre LT DAREN o & | 000 [Thy our WED Users’ Manual SD2000 Date: January 22.
Basic Operation This section explains how to select different channels ang programs; it assumes that you have finished the installation of satellite dish antenna and connected the antenna cable to SD2000(IRD) and tuned it to the corrected carrier by referencing the installation guide, Connecting the power supply Connect the power core to the SD2000(IRD). Selecting SD2000(IRD) Channel Using channel A or W button on the remote control unit or on the front panel, you can step through the channels in turn.
Adjusting the volume 1. Using volume A or 'W button on the remote control, you can adjust the volume Mute the audio sound Using the “Mute” button on the remote control unit to turn off/on the audio sound The 4-digit left corner will light ON in “Mute” status.
Major features Creating your own favorite channel list 1. At main menu, move cursor to point and highlight the “General Setting” menu, and press "OK". At “General setting” menu, goggle the “Favorite list” to “ON”, and go to “Program Settings” menu. 2, At Program Settings” menu, move cursor to your favorite channel! and press “OK” to toggle it on or off. Facts Lit & Parts Cortes ¥ Sonora rma £0 Fromm 3.
Change Parental Password 1. On main menu, select “Parental Password Change” menu and press "OK". IRD will ask you to enter the current password, new password, and re-enter new password to confirm the change Pies home 52 Installation Guide IRD/TV Connection Methods The following pages show the commonly used connect methods between your IRD and TV (or VCR) set. You may need to refer your TV and VCR owner's users’ guide for the better performance.
Move cursor to the specified position and key in corrected settings; then press “OK”. Press "MENU" again to return to main menu Select "Program Installation” menu and press “OK” to the program installation menu: select “Signal Status” to see the carrier status and quality, etc. The “Signal Status” will give you the information of carrier recovery {good or poor), the maximum signal strength, current signal strength, signal ambiguity, and AFC Frequency. That will help to identify the carrier settings.
