Instructions for Use Washing machine
Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. Some of the materials may be recycled, others deposited or decomposed. To avoid pollution of environment, once your appliance is no longer useful, take it to your local authorized waste appliance dealer.
Description of washing machine Technical information 5. Adjustable legs 6. Water outlet hose 7. Water inlet hose 8. Mains power cable Dimensions (w x d x h): 600 mm x 600 mm x 850 mm Depth with door open: 106 cm Weight (net): 90 kg Nominal voltage: 230 V, 50 Hz Power: 2000 W Max. load: 6 kg Power socket: (230 V, 50 Hz, 10 A) Water pressure: min. 0,05 MPa, max. 0,8 MPa Fuse: 10 A 187348 1. Front panel 2. Detergent dispenser 3. Door 4.
Cautions • Be sure to remove transport brackets prior first use of the appliance. Attempted • • • • • • • • • • • • • • operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached). Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be damaged if frozen.
Before connecting the appliance read these instructions carefully. Repairing the failure arising from inappropriate connections or use of the appliance is not covered by the guarantee. 187348 The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Installation and connection In removing the wrapping be careful not to damage the appliance with a sharp object. Package removal Before connecting the appliance, let it warm up to room temperature (wait for two hours). • Our appliances are packed in environmentally • Removal of transport brackets friendly materials which may be recycled, deposited or decomposed without any threat to the environment. To this end all wrappings are marked accordingly. • Move the pipes.
Leveling the appliance • Put the appliance in horizontal position by turning the adjustable legs. The legs are adjustable up to +/- 1 cm. After the adjustment tighten the nuts firmly (A) - towards the bottom of the machine! Vibrations, moving of the appliance and loud operation due to incorrect setting of the adjustable feet shall not be covered by this warranty. The appliance should be placed on a surface with concrete base; the surface should be dry and clean in order to prevent slipping.
Partial Aqua-stop (water stop system) In case of damage on the interior pipe, leaking is prevented by automatic closing system which stops water inlet to the machine. In such cases display A turns red. Inlet pipe must be replaced. Complete Aqua-stop In case of damage on the interior pipe, leaking is prevented by automatic closing system which stops water inlet to the machine. Security system also detects whether there is any water leakage within the interior of the machine.
The wall socket must be accessible at all times and must be equipped with an earth lead (in accordance with the local safety regulations). The permanent connection must be fitted by an authorized personnel only. Damaged mains power cable may be replaced only by the producer or his authorized personnel. Never plug the appliance into the electric shaver socket or hair dryer socket.
Operation A - program selector B - Spin - reduced spinning keyswitch C - Quick wash D - Higher water level - HWL E - Rinse hold button F - START/PAUSE button 187348 10 Signal LED’s: - washing program stages • wash • rinse • spin - Lock / End
• Open the door of the machine. • Load the laundry into the drum. • Close the door. • Open the water inlet faucet. • Select the program. • Add washing and treatment agents (detergent and softener). • Start the operation by pushing the START/PAUSE button (F). - Open the door of the machine. Door is opened by pulling the handle (lever) on the right hand side of the door towards you. - Sort the laundry by the type of fabrics. Do the buttons and zippers, tie the strings and pull out the pockets.
Pay attention to the labels on the clothes, indicating the recommending washing mode (see table of textile treatment symbols on the last page of these instructions). Washing machine operation Program is selected by turning the program selector (A) from the “0” position to the desired washing program. The signal LED indicating particular washing stage for the chosen program starts flashing.
creased at the end of washing, use easy ironing program. Synthetic Normally stained shirts, blouses and other polyester and polyamide garments, or a mixture of these fabrics with cotton. For heavily soil permanent press use program with pre-wash. Delicate This is a program for delicate fabrics (dresses, skirts, blouses) and curtains. Wool Especially gentle program for washing wool and garments made from mixture of other fabrics with wool, appropriately marked for machine washing.
Select the particular function after the selection of the basic program, but prior pressing the START/PAUSE button (F). Reduced spin RPM • Reduction of spin RPM depends on program selection and maximum RPM for particular type of machine. Basic programs Spin speed - RPM max. reduced 1200/1400 1200 → 600 1400 → 700 Synthetics, Mixed 1000 600 Delicate 700 0 Wool 600 0 Hand wash 400 0 Cotton Quick wash (selection by separate button) • Program saves energy.
- Selection of partial programs These are independent programs and may be used when you do not need the entire washing program. In case you would like to use more additional programs in a sequence, you must turn off the appliance prior any new program selection (turn the program selector to “0” for at least one second). Rinse Independent program for rinsing delicate laundry, without intermediate spinning and with short final spin. You may use it for rinsing manually washed delicate laundry.
- Adding washing and softening agents (see Tips for washing and energy saving) • pre-wash compartment • main wash compartment • softener compartment If you do not apply the program which includes the pre-wash feature, you may add washing detergent directly into the drum, using the measuring vessel. When adding softener, be careful to fill the dispenser only up to the marked level. Be sure to close the detergent dispenser when opening/closing the appliance door.
Upon switching OFF, all additional preselected functions are deleted; therefore they must be switched-ON again. - End of operation Flashing LED’s for washing stages indicate that the program was completed. • Sound signal indicates that you may now open the door of the machine. • Extract the laundry from the drum and remove any alien objects from the door gasket. • Leave the door ajar to allow the interior to dry. • Close the water inlet faucet.
interrupted, and when the power is restored the program is automatically resumed. If a power failure occurs when the drum is still full of water, be careful not to open the door before you pump the water out. Special functions • Lock - It is switched on by simultaneously pressing the Quich wash button (C) and HWL button (D) for at least 3 seconds. Selection is confirmed by the sound signal and illuminated signal LED Lock/ End. The function is switched off following the same procedure.
Tips for washing and energy saving • Before washing sort out the laundry according to the type, degree of dirtiness and color resistance. • Prior selecting the washing program consult the • • • • • • • • • • 187348 • sewn tab with information on a particular piece of laundry (see Maintenance Chart on the last page). Wash separately the new colored textile products or the first time. Wash heavily soiled laundry in small quantities and add more detergent.
Hardness scale Degree of hardness °dH(°N) m mol/l °fH(°F) p.p.m. 0-7 0-1,3 0-12 0-120 2 - Medium 7-14 1,3-2,5 12-25 120-250 3 - Hard 14-21 2,5-3,8 25-37 250-370 >21 >3,8 >37 >370 1 - Soft 4 - Extra hard In case of hard water add detergent according to the Chart for degree 1 and add appropriate quantity of water softener (see manufacturer’s instructions).
Cleaning and maintenance Disconnect the washing machine from the mains before cleaning! • The casing should be cleaned with soft cloth and mild detergent. • The interior of the drum and the door gasket is • cleaned by washing at 60°C without laundry and adding half quantity of detergent. If necessary, clean the detergent dispenser. Pull it out from its casing completely by pressing the flap (see Fig.). • If necessary, clean the cover of the bung under 187348 the running water.
• Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. • Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber. • Clean frequently the water inlet hose screen under running water. • After each wash wipe the door rubber gasket. This will prolong its useful life. • Open the filter lid using flat screwdriver or similar tool.
• Turn it anti-clockwise, pull it out and clean under running water. • Insert the filter back as shown on the picture 187348 (arrow and pointer), and tighten by turning it in clockwise direction. To ensure good sealing the gasket surface (A) must be dirt free.
Failures The washing machine automatically monitors the execution of particular functions during the operation, and reports any detected failures. In such cases signal LED’s start flashing in certain sequence, accompanied by the audible signal, sounding in the same sequence as the indicator LED’s flash. The flashing sequence changes in accordance with the nature of the detected failure.
Possible cause Remedy The machine does not work (indicator LED’s are not illuminated). Machine is not powered. Check if: • power in the socket, • the fuse is OK, • plug is in the socket. Washing program does not start (washing stage LED is flashing). Door is not properly closed. Push it towards the machine. Water does not enter the machine (after approx. 8 min the machine reports failure -3 flashes). Disturbed water inlet. Check if: • the water faucet is open, • inlet pipe net filter is clean.
Failure Possible cause Remedy Greasy wads appear on the laundry. Too little detergent (laundry was very greasy). Wash the laundry again. Add more detergent for such soiled laundry, or use liquid detergent. Laundry is stained after washing. You used liquid detergent or detergent for colored laundry which does not contain whitener. Use the detergent containing whitener. White powdery residues on the laundry.
Tables Program chart Cotton 6 60 Cotton + prewash 6 60 Cotton - heavy soil * 6 Cotton Cotton - easy ironing Energy cons. (kWh/ basic cycle) 95 Water cons. (L/basic cycle) 6 Duration (min.) Temp. (°C) Cotton Spin speed (max RPM) Max.
Program chart/ Additional functions Higher water level (HWL) Spin Rinse hold Quick wach Program Cotton Cotton with prewash Cotton heavy Cotton - easy ironing Synthetics with prewash Synthetic Delicate Wool Hand wash Mixed Basic programs Partial programs Rinse Softening Pumping water Spinning possibility 187348 28
Maintenance chart Normal wash Delicate wash Whitening Max. washing temp. 95°C Max. washing temp. 40°C Max. washing temp. 60°C Whitening in cold water Max. washing temp. 30°C Manual washing Washing not allowed Whitening not allowed Ironing Hot iron max. 200°C Hot iron max. 150°C Hot iron max.
