Instructions for Use Washing machine
Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. Some of the materials may be recycled, others deposited or decomposed. To avoid pollution of environment, once your appliance is no longer useful, take it to your local authorized waste appliance dealer.
Description of washing machine Technical information (depending on model) 5. Adjustable legs 6. Water outlet hose 7. Water inlet hose 8. Mains power cable Dimensions (w x d x h): 600 mm x 600 mm x 850 mm Depth with door open: 106 cm Weight (net): 90 kg Nominal voltage: 230 V, 50 Hz Power: 2300 W / 2200 W (depending on model) Max. load: 6 kg Power socket: (230 V, 50 Hz, 10 A) Water pressure: min. 0,05 MPa, max. 0,8 MPa Fuse: 10 A 187352 1. Front panel 2. Detergent dispenser 3. Door 4.
Cautions • Be sure to remove transport brackets prior first use of the appliance. • • • • • • • • • • • • • • Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! When connecting your washing machine to water supply, be sure to use brand new water inlet hose and appropriate sealing gaskets (attached). Do not locate the machine in a room with temperature below 0°C. Parts of the machine may be damaged if frozen.
Before connecting the appliance read these instructions carefully. Repairing the failure arising from inappropriate connections or use of the appliance is not covered by the guarantee. 187352 The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Installation and connection In removing the wrapping be careful not to damage the appliance with a sharp object. Package removal Before connecting the appliance, let it warm up to room temperature (wait for two hours). • Our appliances are packed in environmentally • Removal of transport brackets friendly materials which may be recycled, deposited or decomposed without any threat to the environment. To this end all wrappings are marked accordingly. • Move the pipes.
Leveling the appliance • Put the appliance in horizontal position by turning the adjustable legs. The legs are adjustable up to +/- 1 cm. After the adjustment tighten the nuts firmly (A) - towards the bottom of the machine! Vibrations, moving of the appliance and loud operation due to incorrect setting of the adjustable feet shall not be covered by this warranty. The appliance should be placed on a surface with concrete base; the surface should be dry and clean in order to prevent slipping.
Water outlet connection • Fix the outlet hose to run into the sink or the • • Connect the appliance to the mains supply bathtub, or connect it directly to the wall drain outlet (diameter min. 4 cm). Wall drain must be installed properly and must enable occasional cleaning. Fasten the outlet hose support with a piece of rope led through the hose elbow, to prevent the hose from slipping to the floor. The end of outlet hose should be placed between minimum 60 cm and maximum 100 cm above the floor level.
187352
Operation A - program selector B - Rinse hold button C - START/PAUSE button Washing procedure Signal LED’s: - ON/OFF (orange) - pump stop/failure (green) • Open the door of the machine • Load the laundry into the drum • Close the door • Open the water inlet faucet • Select the program • Add washing and treatment agents (detergent and softener) • Start the operation by pushing the START/PAUSE button (C) - Open the door of the machine.
Pay attention to the labels on the clothes, indicating the recommending washing mode (see table of textile treatment symbols on the last page of these instructions). Program is selected by turning the program selector (A) from the “0” position to the desired washing program. The ON/OFF signal LED starts flashing.
skirts, blouses) and curtains. Wool Especially gentle program for washing wool and garments made from mixture of other fabrics with wool, appropriately marked for machine washing. - Selection of additional function Rinse hold • This function is switched on after the selection of a basic program by pressing the button (B). It may also be switched on during the operation, prior last rinse. Indicator LED above the button is on.
Rinse Independent program for rinsing delicate laundry, without intermediate spinning and with short final spin. You may use it for rinsing manually washed delicate laundry or for extra rinsing for people with skin sensitive to detergents. Softener This program is intended for softening, bleaching or impregnating of washed laundry. It is completed with spinning at max. 1000 RPM.
Start the operation • Push the START/PAUSE button (C). The ON/OFF • LED stops flashing, the machine starts operating after a few seconds. If the door is not properly closed after starting the operation, the ON/OFF LED starts flashing again after a few seconds. When you close the door, the machine initiates the selected program.
spin) to empty the water and terminate the program. Pause button By pressing the START/PAUSE button (C) program may be suspended at any time. After certain time you may open the door if there is no water in the drum, otherwise this is not possible. Program is continued by pressing the START/PAUSE button (C). • Failures Program is suspended in case a failure occurs. Signal LED’s are flashing (see cf. Troubleshooting).
Tips for washing and energy saving • Before washing sort out the laundry according to the type, degree of dirtiness and color fastness. • Prior selecting the washing program consult the • • • • • • • • • • • • 187352 16 sewn tab with information on a particular piece of laundry (see Maintenance chart on the last page). Wash separately the new colored textile products for the first time. Wash heavily soiled laundry in small quantities or add more detergent.
Hardness scale Degree of hardness °dH(°N) m mol/l °fH(°F) p.p.m. 0-7 0-1,3 0-12 0-120 2 - Medium 7-14 1,3-2,5 12-25 120-250 3 - Hard 14-21 2,5-3,8 25-37 250-370 >21 >3,8 >37 >370 1 - Soft 4 - Extra hard In case of hard water add detergent according to the Chart for degree 1 and add appropriate quantity of water softener (see manufacturer’s instructions).
Cleaning and maintenance Disconnect the washing machine from the mains before cleaning! • The casing should be cleaned with soft cloth and mild detergent. • The interior of the drum and the door gasket is • cleaned by washing at 60°C without laundry and adding half quantity of detergent. If necessary, clean the detergent dispenser. Pull it out from its casing completely by pressing the flap (see Fig.). • If necessary, clean the cover of the bung under the running water.
• Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. • Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber. • Clean frequently the water inlet hose screen under running water. • After each wash wipe the door rubber gasket. This will prolong its useful life. • Open the filter lid using flat screwdriver or similar tool.
• Turn it anti-clockwise, pull it out and clean under running water. • Insert the filter back as shown on the picture (arrow and pointer), and tighten by turning it in clockwise direction. To ensure good sealing the gasket surface (A) must be dirt free.
Failures The washing machine automatically monitors the execution of particular functions during the operation, and reports any detected failures. In such cases both signal LED’s start flashing in certain sequence. Flashing sequence changes in accordance with the nature of the detected failure. In some cases you may attempt removing certain failures yourself, so count the number of flashes, repeating after certain pauses.
Failure Possible cause Remedy The machine does not work (symbols are not illuminated). Machine is not powered. Check if: • power in the socket, • the fuse is OK, • plug is in the socket. Washing program does not start (ON/ OFF LED is flashing). Door is not properly closed. Push it towards the machine. Water does not enter the machine (after approx. 8 min the machine reports failure -3 flashes). Disturbed water inlet. Check if: • the water faucet is open, • inlet pipe net filter is clean.
Failure Possible cause Remedy Laundry is stained after washing. You used liquid detergent or detergent for colored laundry which does not contain whitener. Use the detergent containing whitener. White powdery residues on the laundry. It is not the consequence of bad rinsing, but because of neophosphate detergents containing non soluble components (zeolites) for water softening. Such substances may be deposited upon the laundry. Immediately rinse the laundry once again.
Tables Program chart - 6 kg Cotton - color 6 60 Cotton + prewash 6 60 Cotton 6 40 1200 RPM RPM Additional function Rinse hold Energy cons. kWh 400 - 1300 95 Water cons. l 1000 - 1300 6 139 58 2,10 Duration (min.) Temp. (°C) Cotton - white Spin (RPM) Max.
Maintenance chart Normal wash Delicate wash Whitening Max. washing temp. 95°C Max. washing temp. 40°C Max. washing temp. 60°C Whitening in cold water Max. washing temp. 30°C Manual washing Washing not allowed Whitening not allowed Ironing Hot iron max. 200°C Hot iron max. 150°C Hot iron max.
187352 26
