Instruction Manual

Options enabled LED's

These LED's light up when the relative option button is

pressed and indicate that the option has been selected. They

remain on until the machine switches off or a different selec-

tion is made.

“Start/Pause” button

Press this button to start the selected washing programme.

During washing, press the “Start/Pause” button for about 3

seconds to pause the washing cycle. During the pause, the

“Time remaining” Led flashes and STOP appears on the dis-

play. To resume the washing cycle from where it left off, sim-

ply press the “Start/Pause” button again.

Start-Pause button LED

This LED lights up when the washing cycle starts (Start-

Pause button pressed) and remains on until the end of the

programme.

Q Select delayed start but-

ton*

Press this button repeatedly to select after how many hours

you want the selected washing/drying programme to start.

The default value is 0 hours 0 minutes and each time the but-

ton is pressed it increases by 30’ up to 12h and by 60’ for the

following 12 hours, up to 24 hours.

Select delayed start button

LED*

The LED lights up while the delayed start time is being se-

lected and remains on until the programme starts.

Delayed start time show n on

display LED*

This LED indicates that the display is showing the selected

delayed start time.

* Only for models featuring the delayed start option

4.2 DETERGENT TRAY

This is located to the left of the control panel. Pull it out to

open.

The tray comprises four compartments which are marked as

follows

“1”: pre-wash detergent

“2”: main wash detergent

“ ” or “3”: fabric softener, starch, etc. (treatment products).

Compartment “4” is used for bleach. If there is a cover marked

, this means that bleach cannot be used with this model of

machine. If bleach can be used with the machine, there is no

cover.