User manual

Problem Possible cause Solution
The appliance is not working
properly.
Contact a qualified electrician
or contact the nearest Au-
thorized Service Centre.
The temperature in the appli-
ance is too high.
Contact a qualified electrician
or contact the nearest Au-
thorized Service Centre.
The compressor operates
continually.
Temperature is set incorrect-
ly.
Refer to "Operation" chapter.
Many food products to be
frozen were put in at the
same time.
Wait a few hours and then
check the temperature again.
The room temperature is too
high.
Refer to climate class chart
on the rating plate.
Food products placed in the
appliance were too warm.
Allow food products to cool
to room temperature before
storing.
The door is not closed cor-
rectly.
Refer to "Closing the door".
The Super function is switch-
ed on.
Refer to "Super function".
There is too much frost and
ice.
The door is not closed cor-
rectly or the gasket is de-
formed/dirty.
Refer to "Closing the door".
The water drainage plug is
not correctly positioned.
Position the water drainage
plug in the correct way.
Food products are not wrap-
ped properly.
Wrap the food products bet-
ter.
Temperature is set incorrect-
ly.
Refer to "Operation" chapter.
The compressor does not
start immediately after press-
ing the Super, or after chang-
ing the temperature.
This is normal, no error has
occurred.
The compressor starts after a
period of time.
Temperature cannot be set. The Super function is switch-
ed on.
Switch off Super manually, or
wait until the function resets
automatically to set the tem-
perature. Refer to "Super
function"
10