User Manual

Installation
41
EN
Wall mounting brackets (where present)
The fastening system provided must be
installed to ensure the appliance is stable. If
installed correctly, this system prevents the
appliance tipping over.
1. Level the appliance to the required height
using the adjustable feet.
2. Measure the distance from the index of
the opening to the floor.
3. Use the same height on the wall to drill
the holes for fastening the brackets. The
distance between the centres of the
holes is given in the diagram above.
4. Before tightening the brackets fully to the
wall, check that the index on the brackets
is at the same height as the index on the
back of the appliance. Position the
appliance, taking care that the brackets
are correctly inserted.
Heavy appliance
Risk of damages to the appliance
• Insert the front feet first and then the rear
ones.