TECNOLOGIA CHE ARREDA )NSTRUCTIONS BOOK
3 ENGLISH Dear Customer, Thank you for choosing our product. Please read these instructions carefully before connecting and using the appliance. Knowledge of the operating principles will help guarantee correct and safe use of the appliance. This instruction booklet contains the technical characteristics of the washing machine and is full of useful information regarding its operation, all designed to help you get the best out of your appliance.
4 NOTES AND ADVICE FOR THE USER Before connecting the appliance read these instructions carefully. Repairing the failure arising from inappropriate connections or use of the appliance is not covered by the guarantee. This appliance has been designed for use as a domestic washing machine. Any other use is considered as improper and therefore dangerous. Any modifications or attempts to interfere with the washing machine can be dangerous for the user and may damage the appliance itself.
5 NOTES AND ADVICE FOR THE USER Never insert or remove the plug from the mains socket with wet hands. The washing machine must be connected to a mains socket fitted with an efficient earth complying with current safety standards. Do not use extension leads or multiple plug adapters to connect the washing machine to the mains electricity supply. Do not expose the appliance to atmospheric agents. The washing machine can only be opened once the led or display indicates that the cycle has finished.
6 INSTALLING THE WASHING MACHINE (according to the model) Installation must be carried out by qualified personnel in line with the instructions supplied by the manufacturer. Incorrect installation may result in damage and injury. The appliance can be installed anywhere providing that the ambient temperature is not less than 3°C and that the wires or pipes on the rear of the machine are not squashed.
7 INSTALLING THE WASHING MACHINE CONNECTING THE WATER SUPPLY The mains water pressure m ust be between 0.05 and 1.00 Mpa (0.5 - 10 bar.) 7 Before connecting the washing machine, open the valve and allow a certain quantity of water to flow out in order to clean the pipes of any sand or rust. This operation is particularly important in the case where the washing machine has been left standing for a long time or when connecting to a new water supply system.
8 INSTALLING THE WASHING MACHINE CONNECTING TO THE MAINS ELECTRICITY SUPPLY Make sure that the v oltage indicated on the identif cation plate attached to the inside of the f lter door corresponds to that of the mains supply (f g. 12). All cut-outs, electric wiring and mains sockets must have a rating such that enables them to support the maximum load indicated on the identification plate. Once the appliance has been installed, it must be connected to the mains supply through a single-pole switch.
9 USING THE WASHING MACHINE USE OF DETERGENTS The washing machine is fitted with a three-compartment detergent drawer 2 compartment for pre-wash or soak soap powder (1) compartment for normal wash soap powder (2) softener compartment (3) 3 1 Use a low-suds detergent and softener (if required) recommended for automatic washing machines. Follow the dosage instructions written on the packet. 16 N.B. Too much detergent can produce excessive suds and ma y result in a poor wash.
10 USING THE WASHING MACHINE HOW TO REMOVE SOME STAINS Stains exist that cannot be removed by machine washing alone. Before trying to remove any type of stain by hand, first try the removal procedure on a small area of hidden fabric. Start from the edge of the stain and working inwards, this will prevent a dark ring from forming around the site of the stain. A few methods to adopt for removing stains are reported below. WAX: Scrape the wax using a rounded point in order not to damage the fabric.
11 MAIN FUNCTIONS OF THE WASHING MACHINE S P SWM65EG C S Led Start C Optional function buttons L Start button P Programme and temperature knob L USING THE WASHING MACHINE “EASY LOGIC” TECHNOLOGY The electronic washing mac hine is f tted with an “EASY LOGIC” system that automaticall y recognises the quantity of washing loaded.The machine can thus regulate the amount of water to use for the wash and pr oportion the wash time accor dingly, thus saving water, time and energy.
12 USING THE WASHING MACHINE SPIN LOAD IMBALANCE CONTROL: This washing mac hine is equipped with a special electr onic contr ol system f or correctl y balancing the wash load. Prior to each spin, the system ensures that the washing is e venly distributed in the drum. If the washing is not evenly distributed, the f nal spin speed is reduced, and if the load is very unbalanced, the spin is not effected.
13 PROGRAMME TABLES PROGRAMMER KNOB WASH SYMBOL TEMPERATURE FABRIC TYPE Detergent compartment COTTON 90 Heavily soiled white cotton fabrics with organic stains.
14 TECHNICAL CHARACTERISTICS MODEL Dimensions: SWM65EG Width cm.: Height cm.: Depth cm.: Maximum recommended load: Max. spin: (rpm) Water pressure: Max. absorbed power/Electrical connection 59.5 85.0 55.0 5.0 kg. 2.5 kg. 1.0 kg. 400 min. 0,05 MPa - max. 1 MPa see rating plate NOTES: ............................................................................................................................................................................................................................
15 MAINTENANCE CLEANING THE WASHING MACHINE The washing machine has been specifically designed to reduce maintenance to a minimum. Nevertheless, it is important that it is cleaned regularly. Before cleaning, make sure that the appliance has been disconnected from the power supply and that the water supply valve has been closed. The external structure and the parts of the washing machine in plastic must be cleaned with a soft damp cloth only.
16 MAINTENANCE RESOLVING PROBLEMS If the appliance is not working properly, check through the following troubleshooting guide before calling for technical assistance. In some models malfunctions are indicated by an error code displayed at the end of the cycle.
